多晶黑硅的制备及其组织性能

Fabrication and characterization of black polycrystalline silicon

  • 摘要: 利用等离子体浸没离子注入技术在多晶硅基底上制备了黑硅材料,利用扫描电镜、分光光度计和微波光电导衰减测试仪对黑硅的组织结构、光吸收率和少数载流子寿命进行了测试分析,发现黑硅呈现多孔组织,在可见光波段的平均吸收率大于94%,其平均少数载流子寿命为5.68μs.研究了注入工艺参数对黑硅的影响,发现工作气体SF6和O2流量比对黑硅的组织性能影响最大,当其为2.80时制备的黑硅组织性能最好.

     

    Abstract: Black silicon was prepared with polycrystalline silicon by plasma immersion ion implantation. The microstructure, optical absorbance and lifetime of minority carriers of the black silicon were characterized by scanning electron microscopy (SEM), UV-VIS-NIR spectrophotometer and microwave photoconductive decay (μ-PCD), respectively. The results show that the black silicon has a porous structure. The average absorbance of the black silicon is above 94% in the visible region. The average lifetime of minority carriers in the black silicon is 5.68 μs. The effect of immersion parameters on the black silicon was investigated. It is found that the gas flux ratio of SF6 to O2 plays an important role in the microstructure and properties, and its optimum value is 2.80.

     

/

返回文章
返回